How does the Brushshark work?
The Brushshark is a hydraulic tree shear that operates when connected to the auxiliary hydraulics of your skid steer or tractor. The cycling is controlled by the operator by actuating the auxiliary hydraulic controls.
Will this tree shear work on my tractor?
Yes. The Brushshark will work out of the box on tractors equipped with a front end loader with a “skid steer” type quick attach, auxiliary, or third, hydraulic and a hydrostatic transmission or shuttle shift. It will work on most other tractors but some modifications may be required.
How does the Brushshark perform in rocks?
The Brushshark performs excellently in rocky environments. We designed it for the rock laden hills of Central Texas. The slow cycle operation (about 1 second each direction) eliminates constantly crashing into rocks at high speed like rotating equipment does. The steel we use stands up to rocks fine and the hydraulics are sized so that if a rock becomes lodged between the teeth (which is extremely rare) it will either be crushed or stop the tree shear and the operator can reverse the shear direction and it will fall right out.
How much can I clear in a day?
From practical experience and customer feedback it is reasonable to expect to cut 5 to 15 acres per day dependent on the characteristics of the area you are clearing. How dense is it? How thick is the material? How flat or rocky is it? If you watch our videos: Cedar Clearing Equipment and Cedar Tree Clearing you can see how much we clear in a 5 and 10 minute time frame.
Will it work on my particular species of tree or brush?
Yes. Whether it’s tea bushes in Asia, mesquites, cedar or youpon in Texas or oak trees in New York the Brushshark will clear it. The Brushshark has been commercially available since 2003 and we have yet have one customer report back that it didn’t perform satisfactorily in this regard. We’ve even had a few comment that they wished it didn’t cut so good because they accidently took out a T post with it!
What is the Auto-Cycle option?
The auto-cycle option allows the operator to continually cycle the Brushshark without having to continually manipulate the auxiliary hydraulic controls. For example, consider a tractor with lever controlled hydraulics. Each movement of the lever moves the shear plate. With the auto-cycle option, the operator holds the lever down and the shear plate cycles until the lever is released. This is also true of button or switch controlled hydraulics on skid steers or tractors. Hold the button or switch down and the shear will cycle until it is released.
What locations will you ship to?
We can ship throughout the United States as well as internationally. Please contact us for more information at email@example.com or (512) 263-6830 for more information on where we will ship.
Throughout the United States:
Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida | Georgia | Hawaii | Idaho | Illinois | Indiana | Iowa | Kansas | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | South Dakota | Tennessee | Texas | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming